ICM Controls SC 5011, Installation, Operation & Application Manual

Page: 23 / 32

Programming
Setting the program schedule:
1 . Press the
SYS
(left) button until you are in
OFF
mode .
2 . Press and hold the PROG button ( SYS and FAN buttons pressed simultaneously) for 6 seconds .
3 . Press the FAN (right) button 3 times .
4 . SUN thru SAT are blinking .
SUN MON TUE WED THU FRI SAT
PROG
From this screen you have 2 options:
1 . Press the
FAN (right) button to begin programming all 7 days at one time, or
2 . Press the up button to see the other programming options .
Note: The days of the week shown on the display will be programmed simultaneously .
The screens are listed below .
Screen 1 SUN MON TUE WED THU FRI SAT
Screen 2 MON TUE WED THU FRI
Screen 3 MON
Screen 4 TUE
Screen 5 WED
Screen 6 THU
Screen 7 FRI
Screen 8 SUN SAT
Screen 9 SAT
Screen 10 SUN
Program Overview
The SC5011 programmable thermostat has four periods (MORN, DAY, EVE, NITE) that are customizable
for each day of the week . Each period will have a start time, heat temperature, cool temperature
and programmable fan option . The SC5011 monitors the day and time, while maintaining the specific
conditions you have chosen for each period in your program .