
Cleaning Modes
Special Features
Camera navigation cleaning
ㆍPress “MODE” to select or change a
mode on a remote control
ㆍ“MODE” to select or change a mode on
a display screen
After AUTO cleaning, rotate 90°
and AUTO cleaning again.
It works until battery allows.
Intensively clean within 1㎡
Mop cleaning after suction.
ㆍPress “MAX” on a remote control to start
a MAX mode
ㆍPress “MODE” to select or change a
mode on a display screen
ㆍPress “SPOT” on a remote control to start
a SPOT mode
ㆍPress “MODE” to select or change a
mode on a display screen
ㆍMount a mop pad to the cleaner robot
MOP
AUTO
MAX
SPOT
Description
Operation
Display
Use in a house with carpet or
doorsill
It is set to ‘ON’ by default.
It is not available when the mop
plate is attached.
ㆍ“CLIMB” ( )on a remote control to set
or to unset a climb mode.
Maximize the suction for effective
cleaning
ㆍPress “TURBO” on a remote control to
start
CLIMB
TURBO
Operation
To unset a preset climb mode, press
“CLIMB” on a remote control. Press
“CLIMB” again to reset.
Deactivating a climb mode while
OMEGA cleans on a carpet may hinder
OMEGA from coming down from the
carpet.
The climb mode is set to on by default.
(it climbs a door sill up to 15mm in height) Deactivate
the climb mode to prevent the cleaning robot from
going over a door sill, carpet, or mat with 5mm in height.
Climb mode cannot be activated if mop is mounted.
P10 Mounting Mop
It does not work when robot is
located in docking station.
13
Deactivating the climb mode is recommended for a
carpet with long fringes or unique threads.
▶The carpet may be damaged or be ripped.
U
sin
g t
he
R
ob
ot
Cle
an
er
Display
Description