
1. Connect an adapter jack to the back
charging hole of the station.
2. Clear objects around the station,
with a radius of 1.5m from the
center of the station. Side parameter
can be as short as 0.5m.
Installing Charging Station
Mounting Mop
Mop plate
Mop
10
Charging
1. Turn on the side power switch.
2. Place the charging pins (on the bottom of the cleaner) on charging terminals to start charging.
Battery sign on a display window blinks to indicate that it is charging.
The battery sign will change from green, orange, to red, depending on remaining capacity.
3. A green battery sign will show once the cleaner is fully charged.
Charging display LED
Charging terminals
Charging
pins
Mounting a mop pad will automatically disable a climb mode, and the robot cleaner will not
climb over a door sill and floor mat.
1. Put mop pad tips on two mounting pins at the bottom of the cleaning robot’s back side.
2. Slide the pad up to assemble it.
3. Mount a mop on the mop pad.
Place a soft cloth under the robot cleaner when mounting a mop pad to prevent floor scratches.
Charging sign on the display screen will be turned off during charging.
When battery runs low, “Lo” will appear on the display screen.
Initial Power On / Off
Turn the power switch (on the side of the cleaner) to “on” (I).
Turning the switch to (O) will turn off the power.
Mounting
tip and pin
1
2
In
sta
lla
tio
n