Floor
side
ㆍPlease connect the adapter jack directly to the
product in case of manual charging.
Manual Charging
Applying Blocking Tape
Time must be set in advance for a timer mode.
1. Please apply the tape to areas of danger such as banisters, restroom entrance, or in front of stairs.
▶Dust on anti-fall sensors may block the sensors to
detect entrance block areas. Please clean the sensors
on a regular basis.
2. Please apply the tapes with the grooved surface facing the floor. To fix the tape, please use a
double-sided tape enclosed in the box.
Please apply the tape to indicate no entrance areas.
Setting Time
Display
Operation
1. Press “CLOCK” on the cleaner.
Unfixed tape may hinder it from properly recognizing blocked areas.
If it returns to a starting point that is not the station,
“Strt” (Start) will appear on the display screen.
anti-fall sensors
11
▶“BASE” will appear on the display screen, and the
battery sign will blink once it docks in the
charging station.
Click the “BASE” button on the remote control to
charge while the robot cleaner is in operation.
it will find the station and be docked in.
Remote Control
Remote Control
Display
Operation
Charging while in Use
ㆍThis robot cleaner will automatically move to a charging station once its battery runs too low to
continue cleaning. After fully charged, it will start cleaning the remaining areas again and
come back to the charging station once finished (except for the manual mode)
ㆍThis product is designed to go back to the starting point once its battery runs low. This means if
the robot cleaner started cleaning somewhere other than the charging station, it will return to
that starting point instead of the station. However, if the robot cleaner’s cleaning area includes a
charging station within 3m in radius, it will automatically find the station and will be
docked in there.
In
sta
lla
tio
n