63
d.
AP Bridge-Point to Multi-Point
: Connect this router with up to four other
wireless routers, to expand the scope of network.
e.
AP Bridge-WDS
: Connect this router with up to four WDS-capable wireless
routers, to expand the scope of network.
f.
Universal Repeater
: The router can act as Station and AP at the same time.
It can use Station function to connect to a Root AP and use AP function to
service all wireless stations within its coverage.
Please select a proper operation mode you want to use from ‘Mode’
dropdown menu (1), and continue on other operation mode specific settings:
AP
- Please go to section 2-7-1-1
Station-Infrastructure
- Please go to section 2-7-1-2
AP Bridge-Point to Point
- Please go to section 2-7-1-3
AP Bridge-Point to Multi-Point - Please go to section 2-7-1-4
AP Bridge-WDS
- Please go to section 2-7-1-5
Universal Repeater
- Please go to section 2-7-1-6
2-7-1-1 Setup procedure for ‘Access Point’:
Please select the radio band you want to use from ‘Band’ dropdown menu (2),
and the following message will be displayed:
NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to Multi-Point’ mode,
wireless router is operated in wireless bridge dedicated mode – wireless
router is only used to expand the scope of network, and no wireless clients will
be accepted. If you want to use your wireless router to expand the scope of
network, and also accept wireless clients, please select ‘AP Bridge-WDS’ or
‘Universal Repeater‘ mode.
