45
Please click ‘Continue’ to back to previous setup menu; to continue on other
setup procedures, or click ‘Apply’ to reboot the router so the settings will
take effect (Please wait for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
2-5-4 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address)
and PPTP setting (PPTP user name and password). Here we start from WAN
interface setting:
Select the type of how you obtain IP address from your service provider here.
You can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Cable Modem’ section above), or ‘Use the following IP address’ (i.e.
static IP address)
WAN interface settings must be correctly set, or the Internet connection will
fail even those settings of PPTP settings are correct. Please contact your
Internet service provider if you don’t know what you should fill in these
fields.
Now please go to PPTP settings section:
