35
automatic. Press “A “button will enter manual mode, it can adjust the palette
with “UP, Down, LEFT, Right” buttons. By Pressing “C” the system will return
into Auto Mode.
When Auto-Enhance Mode is deactivated
，
can switch between manual and
automatic. Press “A “button will enter manual mode, it can adjust the palette
with “UP, Down, LEFT, Right” buttons. Press “C” will return the users to Auto
Mode.
The modes can be switched with the Auto-enhance mode Button.
If select auto mode, the camera will automatic adjust the to the range of
temperature sensed in the image.
If select “Auto-Enhancement “, both High temp target and low temp target
can be viewed in the image.
If Manual mode is selected, the User can set the palette value to adjust the
image quality. Press “UP” button to increase the level and span
range, press Down to decrease the level and span range. Press Left
button to reduce the upper limit/increase the bottom limit; Press
RIGHT button to increase the upper limit/decrease the lower limit
Alarm Setting
Alarm Types
：
It is only functioned when measuring. User cab set alarm
OFF, High
temp alarm
，
Low temp alarm here. It will alarm when
