ICI Caldaie CODEX GT Series, Manual

Page: 2 / 32

2
INDEX
SYMBOLS USED IN THE MANUAL
a
DANGER
To indicate actions that, if not performed correctly, can result in injury of generic origin or may generate malfunction
or damage to the appliance; therefore require particular caution and adequate preparation.
d
IT IS FORBIDDEN
To indicate operations that SHOULD NOT be performed.
m
IMPORTANT
To indicate particularly useful information and important.
The illustrations and data presented are not binding. The company reserves the right to make without prior notice any changes it
deems appropriate for continuous improvement and constant updating.
General information
3 Introduction
3 Range
3 Compliance
4 Warnings
4 Prohibitions
5 Hazards
5 Identification
6
Appliance description
6 Structure
7
Dimensions and connections
9 Technical data
10 Control panel (accessory)
10 Burners
Installation
11 Product receipt
12 Handling
12
Installation room
13 System cleaning
13 Hydraulic connections
14 Starting hydraulic circuit
15 Flue exhaust
15 Condensate drain
16 Door opening
16 Door opening inversion (from the right to the left)
17 Door adjustment
18 Insulating casing assembly
19 Burner assembly
19 Electrical connections
20 Water treatment
20 Limestone build-ups
20 Limestone diagram
20 Corrosion on water side
21 System filling and emptying
Use
22 Preliminary checks
22 Commissioning
22
Checks after commissioning
23 Stop periods
23 Short periods of time
23 Long periods of time
23 Decommissioning of old appliances
Maintenance
24 Boiler
24 Burner
25
Any anomalies and remedies
25 Environmental protection and disposal
25 Information for the disposal of electrical and
electronic equipment
Useful information and declarations
26 QR code
27 Declaration of Conformity
Notes
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz