ICHRoboter iCleaner-200, User Manual

Page: 3 / 20

2 Product Overview
2.1 Functions
◇
Automatic cleaning: the default mode is automatic, however, this can be overridden using the
Remote Control. When the Remote Control is not being used, the iCleaner-200 will return to
automatic mode.
◇
Overall cleaning: the iCleaner-200 not only cleans the floor of your pool, it also cleans the
wall, at the same time, the iCleaner-200 will filter water, and the dirt will be collected into
Filter Bag.
◇
Timing cleaning: you can select one of three cleaning time with Remote Control (0.5h, 1h or
2 h). The iCleaner-200 will shut down automatically when the selected cycle time is over.
The power box must be turned of manually.
◇
Manual cleaning: the Remote Control can be used to clean specific areas immediately.
◇
Self protection (out of water): Impeller decelerates to a stop in twenty five seconds if the
iCleaner-200 senses it is no longer in water, to prevent personal injury and to protect the
water pump.
◇
Stop protection: the iCleaner-200 will stop if foreign matter retards the Impeller.
2.2 Product Parameters
iCleaner-200
100-240VAC, 50-60Hz
200W
0.5Hr/1Hr/2Hrs
15m
3
20m /h
15m/min
Host: IP68
Model
Input Voltage
Rated Power
Cycle Time
Floating Cable Standard Length
Filter Bag
Water Pump Capacity
Moving speed
Optimum Storage Temperature
Optimum Working Temperature
Dimension
（
L*W*H
）
Grade of Waterproof
- 2 -
Standard
:
70um
10~32 ℃
0~40 ℃
452.5 * 487.8 * 292mm
Gross Weight
574 * 574 * 413mm Packing Measurement(L*W*H)
20.6kg