ICHRoboter iCleaner-200, User Manual

Page: 19 / 20

- 18 -
Indicator
light
Solution
Failure
Green light
flashing
Water
protection
1.Check whether the impeller is damaged;
2.Check whether the water pump motor is working;
3.Put the robot in the water.
Yellow light
flashing
Water pump
motor
overheating
1.Check whether water pump motor and impeller
about exceptions
2.After waiting for temperature cooling to electring
Blue light
flashing
The roboter
turned over
1.Adjust the machine to the level state.
Blue and green
lights flashing
at the sametime
Walking motor
overload
1.Check whether travel mechanism about exceptions.
Blue
、
green
and
y
ellow
lights flashing
at the sametime
Water pump
motor
overload
1.Check whether water pump motor and impeller
about exceptions.
Indicator
light
Solution
Failure
Green light
flashing
The iCleaner
has stopped
due to lack
of water
Return the robot to deeper water and restart
Yellow light
flashing
The Motor Pump
inside the robot
has over heated
Contact the supplier for support
Blue light
flashing
The robot is
upside down
Turn the iCleaner over, and restart using
the remote control or power swich
Blue and green
lights flashing
The walking
(drive wheel)
motors are
over loaded
1.Check the walking motors, Drive tracks and
tacking belts for debris or damge.
2. Clear bebris or replace parts parts and restart
the iCleaner.
Blue
、
green
and yellow
lights flashing
The water pump
is over loaded
1.Turn the robot off, check the impeller for debris,
or damage.
2.Clear or replace impeller, then restart the iCleaner.