icetro IM Series, Installation, Service & Operation Manual

Page: 36 / 50

IM series FND PCB module function provides additional error code info
and can be adjusted for longer flush times
“Increase”
Button
“Decrease”
Button
“Mode”
Button
1) In standby mode, FND is off.
2) When you press "MODE" button, FND will turn on and show the program
version.
3) While FND is on, press "UP" or "DOWN" button to move to the previous
or next item.
4) Move to each item and press "MODE" button to see the default value on FND.
5) Change setting with "UP" or "DOWN" button, and press "MODE" button to
save to move to upper item.
6) Press "MODE" button on simple display item to display the corresponding
value and press "MODE" button again to move to upper item.
7) It will turn off automatically when it has no input for 30 seconds.
WITH FND ‘ON’ – Program version displayed:
8) Press "UP" + "DOWN" buttons simultaneous for 3 seconds to perform
forced harvest. (3 minutes) – Forced harvest Function
9) Press "DOWN" + "MODE" buttons simultaneous for 3 seconds to perform
forced drain. (30 seconds) – Forced Drain Function
10) Press “UP” + "DOWN" + "MODE" buttons simultaneous for 3 seconds and
the FND setting values will be initialized. – Setting Value Initialization
Operating Order