icetro IM Series, Installation, Service & Operation Manual

Page: 16 / 50

5. Maintenance, Repair, and Disinfection
5-1. Disassembling Parts
1) Disassembly of Water Curtain
①
Hold the bottom side of the water curtain with both hands,
slightly pull to the front, and push upward to remove.
2) Disassembly of Ice Thickness Sensor
①
Press both hinges on the top side of the ice thickness sensor and pull
to the front to remove..
②
To remove ice thickness sensor and wiring from the ice making chamber,
remove the top cover of the ice making chamber and remove the connector
connected to the electronic unit.
3) Disassembly of Water Vessel
①
Twist bot hands and pull both projections on the front side of the water
vessel.
②
When the projections on both sides are released from the grooves,
hold the front side of the water vessel with hands, pull to the front side
slightly, pull downward to remove in a way that the stop bumps(three)
on the back side would be released.
※
Caution: When removing or inserting the water vessel, ensure it does
not interrupt water level sensor and water pump.