icetro IM Series, Installation, Service & Operation Manual, Page: 40 / 50

1 Descriptions
ON Drain after harvest
OFF Drain after ice making
2 Descriptions
ON Use drain function
OFF
Do not use drain function
(All the drain time : oFF)
- Initial dump : basic process
1) It only works at the beginning of the first “ice making".
2) Check the water level sensor and operate the dump valve and water pump in case of high water level.
3) When the low level is detected, the dump valve and the water pump are stopped.
4) The maximum drain time is 30 seconds.
5) After the initial drainage is completed, the water supply enters operation.
Model
Initial drain
time
Drain after
harvest
Drain after ice
making
Water supply
delay time
Pump stop
time during ice
making
Harvest Assist
Temperature
30” Series
20s 10s N/A (20s) 15s N/A (15s) N/A (32F)
22” Series
20s 10s N/A (10s) 5s N/A (0s) N/A (32F)
1100 Series 20s 10s N/A (10s) 30s N/A (15s) N/A (32F)
3 Descriptions
ON Air cooled
OFF Water cooled
4 5 Descriptions
ON ON
IM-0350/0460/0550-
22 Series(22”)
ON OFF IM-1100 Series
OFF ON TBD
OFF OFF
IM-0350/0460
/0550/0680
Series(30”)
IM-0350/0460
0550/0680
Air cooled model
IM-0460/0680
Water cooled
Model
IM-0350/0460
0550-
22(22”)
Water Cooled
Model
IM-1100
Water cooled
Model IM-0350/0460
0550-
22(22”)
Air Cooled model
IM-1100
Air cooled
Model
2.2 IM series PCB _ Dip switch setting
Should a replacement board be needed, insure setting is correct for model of ice maker