IceTech CD 50, Service Manual

Page: 19 / 37

Granular Ice Technical Service Manual
19 COD: IQ02_404MTIN.DOC
WARNING: DO NOT LEAVE PACKING MATERIALS (PLASTIC BAGS, CARDBOARD
BOXES, ETC.) WITHIN REACH OF CHILDREN.
4. INSTALLATION
4.1. Recommended placement of unit
IMPORTANT!
ICETECH machines are intended to operate at room temperature between 5°C and 43°C and
with water temperature ranging between 5°C and 35°C. You may encounter evaporator/gearbox
malfunctions should the machine run at temperatures below the recommended minimum. When
running above maximum recommended temperatures you can expect shorter compressor life
and decreased production.
Air-cooled units receive air input via front of machine and expel air through rear grille.
IMPORTANT!
If front and/or rear ventilation is inadequate, obstructed, or in close proximity to other heat
producing machinery, use of a water-cooled unit is strongly recommended.
The above mentioned also applies should unit be installed in an area where dust, smoke, or
other airborne pollutants may be present. Units
—especially air-cooled ones—should not be
installed in kitchens. To facilitate access to condenser and/or water pressure valve, allow
sufficient space at front of the machine. Ensure that flooring is firm and even.