background image

 

22 

 

WARRANTY POLICY

 

 
 

I.C.E. Inc warrants all components in new machines to be free of defects in materials and workmanship for 
the period listed below: 
 

 

 

 180 days on Main PCB’s, Computers & Motors 

 

 1 year on all LCD monitor panels 

 

 90 days on all other electronic and mechanical components 

 30 days on all I.C.E. repairs and parts purchases 

 

I.C.E. Inc shall not be obligated to furnish a warranty request under the following conditions: 

  

 Equipment or parts have failed through normal wear and tear 

 

 Equipment has been subjected to unwarranted stress, abuse or neglect 

 

 Equipment has been damaged as a result of arbitrary repair/modification  

 

Products will only be covered under warranty by obtaining an I.C.E. authorized RMA #.  To obtain an RMA # 
please provide I.C.E. tech support with the game serial # or original I.C.E. invoice # and a detailed description 
of the failure or fault symptoms.  

 

I.C.E. Inc will assume no liability whatsoever for costs associated with labor or travel time to replace defective 
parts.  All defective warranty covered components will be replaced with new or factory refurbished compo-
nents equal to OEM specifications.   
 
I.C.E. Inc will cover domestic UPS ground, or comparable shipping costs during the warranty period.  Interna-
tional or expedited shipments are available for an additional charge.  To obtain credit defective parts must be 
returned to I.C.E. Inc, at the customer’s expense, within 30 days.  After 30 days a 15% re-stocking fee will 
apply to all returns. 

 

ICE distributors are independent, privately owned and operated.  In their judgment, they may sell parts and/or 
accessories other than those manufactured by I.C.E. Inc.  We cannot be responsible for the quality, suitability 
or safety of any non-I.C.E. part or modification (including labor) that is performed by such a distributor. 

 

 
 

 

Innovative Concepts in Entertainment 

10123 Main St. 

Clarence, NY 14031 

Phone #: (716) - 759 – 0360 

Fax #: (716) – 759 – 0884 

www.icegame.com

 

 

Summary of Contents for Hoop Fever























Reviews: