9
When the linking option is used, each game must have
it’s own unique “I.D. Number” so that the games can prop-
erly link and talk to each other. Enter Mode #19 on all
games, then set a number that is different for each game.
The number used may be 0 through 13. the numbers 14
and 15 are reserved for the Jackpot Marquee. (Sold as a
separate option)
Observe that game I.D.’s on all games are different, then
exit programming mode on all games at the same time.
MODE #20
CREDIT DISCOUNTING
This mode enables the game to give the players an extra
game when multiple coins are inserted. The number
shown will be how many coins must be inserted for an
extra game. Example: setting a “6” would mean that for
every 6 coins inserted, an extra game would be given.
Setting a “0” turns this mode off. The default value for this
mode is”0”.
MODE #21
NOT USED
MODE #22
BEACON LIGHT POINT
THRESHOLD
This option allows you to select a point threshold, where
the optional point beacon light will turn on. Once this point
threshold value is reached, the beacon light will turn on.
Setting the value to “0”turns the option off. Any other
value sets that as the threshold value.
NOTE: WHEN SETTING UP MULTIPLE
GAMES IN THE SAME LOCATION, IT IS A
GOOD IDEA TO TURN THE ATTRACT MODE
OFF ON ALL BUT 1 GAME.
BURN IN SELF TEST MODE
This allows you to enter the BURN-IN SELF TEST
MODE, which can be very handy in problem diagnostics.
To enter this mode, press and hold the GAME SELECT
and START buttons at the same time WHEN IN MODE
#1.
Perform the following tests when in this mode:
1. Press the face panel push buttons to check for their
proper operation. An audible sound will be heard if
working properly.
2. The face panel push buttons should light if they are
working correctly.
3. Move the coin mech micro switch wires. An audible
sound will be heard if they are working correctly.
4. Throw a ball into the basket. If the sensor is working
correctly, an audible sound will be heard.
To exit the self test mode, press the “Counter / Program-
ming” button inside the coin door.
GAME TESTING
It is easy and advisable to test your game after installa-
tion. After the game is set up and all options have been
set up correctly, perform the following tests:
1. Test for proper acceptance of money.
2. Test for proper dispensing of tickets, if you have set
that option.
3. Test for proper game play, including proper scoring.
4. Test for proper retention of game memory, when the
game power is shut off and turned back on.
5. Be sure to check your electronic game counter and
write down any information you may wish to record.
6. When testing linked games, be sure all of the game
scores show up properly.
CUSTOMIZING YOUR GAME