manualshive.com logo in svg

Ice SCRUB 50, Use And Maintenance Manual

Share
Download
Ice SCRUB 50 Use And Maintenance Manual Download Page 3

3

CONTENTS

CONTENTS ..........................................................................................................................................3
SYMBOLS USED IN THE MANUAL ...................................................................................................5
PURPOSE AND CONTENT OF THE MANUAL ..................................................................................6
TARGET GROUP .................................................................................................................................6
STORING THE USE AND MAINTENANCE MANUAL ........................................................................6
ON DELIVERY OF THE APPLIANCE .................................................................................................6
INTRODUCTORY COMMENT .............................................................................................................6
IDENTIFICATION DATA .......................................................................................................................6
TECHNICAL DESCRIPTION ...............................................................................................................6
INTENDED USE ...................................................................................................................................6
SAFETY ...............................................................................................................................................6
REGISTRATION PLATE ......................................................................................................................7
TECHNICAL DATA (SCRUB 50) .........................................................................................................8
TECHNICAL DATA (SCRUB 55 - 65) ..................................................................................................9
GENERAL SAFETY REGULATIONS ................................................................................................10
SYMBOLS USED ON THE APPLIANCE ..........................................................................................13

SYMBOLS PRESENT ON THE REGISTRATION PLATE ........................................................................................................13

SYMBOLS PRINTED ON THE APPLIANCE ............................................................................................................................13

LABELS PRESENT ON THE APPLIANCE ...............................................................................................................................13

SYMBOLS USED ON THE INSTRUMENT PANEL (version Scrub 50D) .................................................................................14

SYMBOLS USED ON THE INSTRUMENT PANEL (versions Scrub 50C-50O-55D-65D)........................................................14

DISPLAY SCREENS (versions Scrub 50C-50O-55D-65D) .............................................................15
PREPARING THE APPLIANCE .........................................................................................................19

HANDLING THE PACKED APPLIANCE ...................................................................................................................................19

HOW TO UNPACK THE APPLIANCE (versions without PM) ...................................................................................................19

HOW TO UNPACK THE APPLIANCE (versions with PM) ........................................................................................................20

HOW TO TRANSPORT THE APPLIANCE ...............................................................................................................................21

COMPONENT POSITIONING ..................................................................................................................................................22

APPLIANCE SAFETY ...............................................................................................................................................................23

TYPE OF BATTERY TO BE USED ...........................................................................................................................................23

BATTERY MAINTENANCE AND DISPOSAL ...........................................................................................................................23

INSERTING BATTERIES INTO THE DEVICE ..........................................................................................................................24

CONNECTING BATTERIES TO THE SYSTEM OF THE APPLIANCE ....................................................................................25

RECHARGING THE BATTERIES (versions without built-in battery charger) ...........................................................................25

RECHARGING THE BATTERIES (versions with built-in battery charger) ................................................................................26

HOUR METER (50D versions) .................................................................................................................................................27

HOUR METER (traction versions) ............................................................................................................................................27

BATTERY CHARGE LEVEL INDICATOR (50D versions) ........................................................................................................27

BATTERY CHARGE LEVEL INDICATOR (traction versions) ...................................................................................................27

INSTALLING THE BRUSH (SCRUB 50D) ................................................................................................................................28

INSTALLING THE BRUSH HEAD SPLASH GUARD (SCRUB 50D) ........................................................................................28

BRUSH ASSEMBLY (SCRUB 55-65 without PM).....................................................................................................................28

ASSEMBLING THE BRUSH HEAD SPLASH GUARD (SCRUB 55-65) ..................................................................................29

BRUSH ASSEMBLY (SCRUB 55-65 with PM)..........................................................................................................................29

Summary of Contents for SCRUB 50





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands