25
4.4 Fitting the Wrap-around Handlebars
Fitting the wrap-around handlebars in place of the
standard handlebars is a simple procedure. Just
remove the handlebar grips, shifter, and brake
levers from the standard bars, then remove the
standard bars from the stem. Slacken the stem
clamp which is half way up the stem, turn the
top part of the stem 180 degrees and push it
down as low as it will go into the lower half.
Fasten the wrap-around handlebars to the stem,
and replace the brake levers, shifters, and
handlebar grips.
If you have previously fitted a mirror, consider
using one of our mirror mounts to place the
mirror in a more convenient place on the
handlebars.
4.5 Fitting a Rohloff
The left side CNC rear drop out on the standard ICE
B1 models is equipped with a mounting point for the
Rohloff OEM2 axle plate (Rohloff No 8227) making a
tidy job of a Rohloff retrofit.
What you will need:
•
A complete built rear wheel (the hub is only available as 32 hole)
•
Rohloff Art Nr: 8025 SPEEDHUB 500/14 CC DB OEM Silver
•
Art Nr: 8250 Chain Tensioner
•
Art Nr: 8227 Axle Plate CC OEM2
•
Art Nr: 8281 Brake Disc 160 mm, International standard 6 bolt fixing for Shimano.
For more information on Rohloff, please see http://www.rohloff.de/en/home/index.html
Summary of Contents for B1
Page 4: ...4 1 1 Overview ...
