OPERATING & MAINTENANCE MANUAL –
VERTICAL STACK WATER SOURCE HEAT PUMP (VWSHP)
3
OPERATING & MAINTENANCE MANUAL –
VERTICAL STACK WATER SOURCE HEAT PUMP (VWSHP)
CONSUMER SAFETY AND OPERATING NOTES:
FOR SAFE AND OPTIMAL ENJOYMENT OF YOUR ICE AIR WSHP UNIT, PLEASE READ THE FOLLOWING CONSUMER SAFETY
AND OPERATING NOTES CAREFULLY BEFORE OPERATING YOUR EQUIPMENT!
•
This unit MUST be serviced only by professionally trained, qualified technicians. Do NOT attempt to maintain or service this
unit on your own – severe injury and death can occur from electric shock, moving parts, and other hazards.
•
Your
ICE AIR
units must each be wired on an individual, dedicated electrical circuit with the correct voltage and proper
amperage (capacity) to match the unit nameplate requirements.
•
Each unit’s electric circuit must have a proper overcurrent protection device, employing an approved circuit breaker or fuse
of the proper rating under NEMA and local building codes.
•
Every unit contains refrigerant within a sealed and pressurized refrigerant system. This system must not be opened or
tampered with and any refrigeration system repairs MUST be carried out by trained technicians. Refrigerant must be
properly handled and recycled per EPA regulations and guidelines.
•
Your
ICE AIR
unit must be properly installed and commissioned to operate correctly. Improper unit installation, adjustment
or commissioning, and / or improper piping installation and connection can lead to equipment malfunction and hazardous
operating conditions, and may void your Warranty. If you have any doubt about the proper installation of your WSHP unit,
please contact your property manager at once to have a qualified technician inspect the equipment. Do NOT operate the
equipment when in doubt – have it inspected first!
•
Your
ICE AIR
equipment is covered by a manufacturer’s Warranty (see Warranty Information Sheet for full terms and
conditions). Your unit(s) must be properly installed and kept free of obstructions. Additionally, proper cleaning of the unit
filter, evaporator coil and all air flow areas must be maintained. Failure to do so will decrease unit function and efficiency,
and may void your Warranty.
