Page 10
Fix the handle with the Velcro and slide the ends of the handle into the flaps.
Remove the cords used to help pack the rescue system
!
Now fold the flap seen in picture in the designated bag
under the plastic protection.
In order to avoid unwanted release of the rescue
system, the closing splint must be held with a special
thread (50 N) which is made with certified material.
A higher breaking force could otherwise endanger
the release of the rescue system!
After installing the first rescue system it is essential
to conduct test activation (in flight position, sitting in
the harness).
Compatibility check
A control of every new combination of rescue system and harness/outer container
has to be carried out by either the producer of the harness or the rescue system or
an authorized person (dealer or flight instructor). The activation of the rescue
system in flight position has to be correct and in conformity to the construction
2
1
3
