9
AfiMilk MPC
Installation Manual
o
Press
to confirm.
o
When done, press
twice to exit editing mode.
7.2.5
Adjusting the G and/or H parameter value via communication
The easiest way to adjust G and H parameters values is via the
AfiControl
interface. As
explained below, you may change the value of each milking point individually
OR
set a
uniform value to ALL the milk meters.
To change the
G
and
H
values via AfiFarm PC enter
Parameters
➢
Tools
➢
Parlor
and select
the stall to adjust as shown below.
On the right hand side section of the screen, adjust the
G
and
H
values for the selected
stalls.
Summary of Contents for Afimilk MPC version 4
Page 1: ......