Adjust to zero.
Inflating and measuring.
Display and save the
measuring result.
MEASUREMENT
12
START
STOP
4.
Press STOP button to turn off
the monitor. Otherwise it will
power off.
2
.This device will proceed
to transmit data
after measurement.
The Bluetooth symbol
blinking on the LCD
indicates data is
transmitting.
3.
If the data is successfully
transmitted, the LCD will then
display “dONE”.
If the data transmission fails, the
LCD will display “ ” instead.
13
CAUTION
5. Do not kink the connection tube; otherwise, the cuff pressure may
continuously increase, which can prevent blood flow and result in harmful
injury to the PATIENT. Sensitive people, including pregnant women, pre-
eclamptic patients, patients with implanted medical electronic devices;
and those who have have atrial fibrillation (AF), premature ventricular beats
and peripheralarterial disease (PAD), should avoid using the unit whenever
possible.
1. When using this device, please pay attention to the following situations
which may interrupt blood flow and influence blood circulation of the patient,
thus cause harmful injury to the patient: too frequent and consecutive multiple
measurements; the application of the CUFF and its pressurization on any wrist
where intravascular, access or therapy, or an arterio-venous (A-V) shunt, is
present; Inflating the cuff on the wrist on the side of a mastectomy.
2. Do not apply the cuff over a wound, otherwise it can cause further injury.
3. Do not inflate the cuff on the same limb which other monitoring ME
EQUIPMENT is applied around simultaneously, because this could cause
temporary loss of function of those simultaneously used monitoring ME
EQUIPMENT.
4. Using it in situations that can result in prolonged impairment of the
circulation of the blood of the PATIENT.
MEASUREMENT
