Recall the Records
1
.Press “MEM” button to access the
memory. The monitor will display the
calculated value of the most recent
readings first.
2.
Press “MEM/UP” button or
“SET/DOWN” button to rotate the
history records.
“MEM/UP” to go forward;
“SET/DOWN” to go backward.
The most recent record (1) is shown first. Each new measurement
is assigned to the first (1) record. All other records are pushed back
one digit (e.g., 2 becomes 3, and so on), and the last record (60) is
dropped from the list.
CAUTION
DATA MANAGEMENT
14
When you did not obtain an accurate measurement, you can clear all the
results by following the steps below.
Delete the Records
1.Under Memory Recalling Mode, press
and hold both the “MEM” button and the
“SET” button for 3 seconds.
2.The LCD will display “dEL dONE”,
indicating that memory clearing is
complete. Then it will shutdown.
To cancel the clearing process in
Memory Recalling Mode, press
“START/STOP” to turn off the monitor.
3.When there is no memory in the monitor,
if you press the “MEM” button to look up
history, the LCD will display as pictured
to the right.
CAUTION
15
DATA MANAGEMENT
