IC Bus CE Series, Operation And Maintenance Manual

Page: 45 / 239

Instrumentation
Quadrant 2 – Display
Messages
Description Flash (Yes / No) Warning Indicator
Association
Washer Fluid Low Indicates low washer fluid level. Yes No
Electrical Fault When instrument panel gauge cluster's ability to display
diagnostic codes is enabled, this message is displayed
when there are active diagnostic codes. Yes No
Check A/C Indicates a fault in the HVAC System. Yes No
Air Filter Restriction Message displayed indicates restricted air flow to the
engine. Yes No
Exterior Lamp Check Active Message displayed indicates Exterior Lamp Check is in
progress. Yes No
HVAC Temp Setting Bar graph displayed show temperature setting in low to
high increments. No No
Activate HVAC Front Blower Bar graph displayed show blower speed setting in Off and
low to high increments. No No
Air Pressure Diagnostic Yes No
Cruise Indicates that the Cruise Control System is turned On. No No
Check Brake Switch Yes No
Check Pupil Warning Indicator Yes No
Check Stop Arm / Crossing
Gate Yes No
Check Exterior Lamps Yes No
Engine Control Shutdown Yes No
33