![background image](http://html2.mh-extra.com/html/ic-bus/ce-series/ce-series_operation-and-maintenance-manual_3301627137.webp)
Operation
Pedal Adjustment
Adjustment of brake pedal free travel should not be necessary,
but if it is, it is extremely important that the work be properly
performed.
Allow only qualified technicians to perform this
operation.
Traction Control (If Equipped)
WARNING
To prevent property damage, personal injury, and
/ or death, drivers operating a Traction Control
equipped vehicle should employ safe driving
practices and assume no additional driving
risks. Traction Control systems are designed to
enhance overall vehicle safety when a vehicle is
driven within its safe operating limits. Traction
Control cannot compensate for a vehicle which
is being driven beyond the physical limits of
control.
Your vehicle may be equipped with an optional
Traction Control system which helps you
maintain the stability and steerability of your
vehicle, especially on snow or ice-covered
roads and gravel roads.
It reduces engine
power and / or selectively applies the rear
brakes. The system allows your vehicle to make better use of
available traction in these conditions by also limiting the engine
rpm when you push further on the accelerator, which limits
wheel spin. The TRAC CTRL indicator in the Instrument Panel
Gauge Cluster will illuminate during this Traction Control event.
The TRAC CTRL indicator will also illuminate if the system is
malfunctioning.
NOTE: The traction control braking (ATC action) to limit
wheel spin does not occur at vehicle speeds above
approximately 50 km/h (31 mph).
Therefore, at speeds
above 50 km/h (31 mph), all ATC events are controlled only
by Engine Power Limiting.
The Traction Control switch for Hydraulic Brake equipped
vehicles.
With the Traction Control switch in the TRAC CTRL
position, the system operates as described above. The MUD /
SNOW position of the Traction Control switch provides modified
system performance for deep mud or snow conditions. If the
optional Traction Control switch is in this position, the Instrument
Panel Gauge Cluster TRAC CTRL indicator will flash.
125
Summary of Contents for CE Series
