IC Bus CE Series, Operation And Maintenance Manual

Page: 102 / 239

Seating and Safety Restraints
1. Removable Seat Pad
2. Chest Clip
3. Two Piece Seat Cushion
4. Harness Buckle
Activate the restraint system by lowering the two-piece seat
cushion.
FOLD THE TOP PORTION OF THE CUSHION
UNDER THE BOTTOM PORTION TO FORM A SEATING
SURFACE FOR THE CHILD. Be sure seat belt buckles (if
equipped) are NOT beneath the two-piece seat cushion. Failure
to fold the seat cushion under can result in damage to the
restraint and thus improper restraint of the child.
Open chest clip by squeezing middle tabs and pulling chest clip
apart.
Unbuckle harness buckle by pressing down on RED release
button.
To loosen harness, lift metal at top of seat and pull down on
shoulder strap to loosen strap. Repeat with second shoulder
strap.
1. Metal Tabs
2. Shoulder Staps
3. Harness Buckle
Place the child in the restraint with the child's back flat against
the back of the bus seat cushion. Position shoulder straps over
the child's shoulders.
Buckle harness by inserting buckle tongues into harness buckle.
Listen for an audible click when each buckle tongues is fastened.
Check that the buckle connection is secure by pulling on the
shoulder straps.
1. Top Straps
90