3. Unpacking and verifying
Please verify if the following items were delivered:
n
MX-AMP 5x50E
n
Line cord
n
2 brackets for rack mounting
n
User manual
4. Safety instructions
Please read carefully the instructions in this manual before use. Please keep this user manual
nearby for anytime reference.
The Mixer Amplifier MX-AMP 5x50E is intended for use over a range of ambient temperatures from
0°C to +40°C. During transport or storage temperatures from -20°C to +70°C are permissible. Do
not operate the MX-AMP 5x50E in a damp or dusty area nor expose it to rain or to an environment,
where it may be splashed by water or other liquids. Please allow the unit sufficient time for
acclimatisation to room temperature (minimum 30 minutes) before powering up, if you bring it from
a cold into a warm environment. Do not place the product where it will be in the path of direct
sunlight or near a heater.
Check your local mains voltage before connecting the MX-AMP 5x50E. This device is normally set
up for an AC line voltage of 230 volts, 50 to 60 Hz.
The wires of the mains power cord have the following colours:
GREEN and YELLOW:
PE (Protective Earth)
BLUE:
N (Neutral)
BROWN :
L (Live)
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked by
the letter PE or by the safety earth symbol or coloured green and yellow. The wire which is
coloured blue must be connected to the terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
Warning!
The protective earth conductor must never be interrupted even for test purposes! This may
be dangerous to life!
Do not put cups, bowls or other containers with liquid or metallic objects on the top of the amplifier.
Do not open or remove the amplifiers cover to prevent fire or electric shock, for there are high
voltage components inside. Do not block the ventilation slots of the amplifier chassis. This will
cause the temperature rising and may result in fire.
ic audio
MX-AMP 5x50E
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: [email protected]; www.ic-audio.com
EN
4
