iBridge IBR-ITAB, User Manual

Page: 2 / 68

2
The IBR-ITAB iBridge
®
Touch
Screen Tablet Keypad is a " smart "
user-friendly, interactive menu-driven Z-
Wave enabled tablet keypad designed
for your Napco control panel. Its inter-
active touch screen will not only display
the status of your system, but will also
give you step-by-step instructions to
guide you through all operations.
This booklet contains important
information about the operation of your
system with the
IBR-ITAB keypad; read
it carefully and keep it handy for future
reference. Check the Glossary for terms
that may be unfamiliar to you.
You'll probably find subjects or
screens mentioned in this booklet that
do not apply to your system. Napco key-
pads and control panels have such a
wide variety of features that few security
systems, if any, will ever need them all.
Your alarm professional has chosen
appropriate features for your particular
needs.
Regardless of how your system has
been configured, rest assured that it has
been carefully designed and engineered
to the highest industry standards. To
assure optimum safety and security,
familiarize yourself with this equipment.
Periodically check its condition and state
of readiness by testing it at least once a
week in both the ac/battery and battery-
only modes (ask your alarm professional
how to make these tests).
I N T R O D U C T I O N
IMPORTANT - TEST YOUR SYSTEM WEEKLY
Test your sounding device and backup battery
(These tests should only be performed on weekends or at a time
designated by your alarm company.)
1. While disarmed, tap Security , Other Options , Keypad Mode ,
R
.
2. Answer NO (tap Q ) until "ACTIVATE SIREN TEST" appears in the
window.
3. Tap YES (
P ) to execute the test. The alarm will sound for about
two seconds.
•
If the alarm does not sound, call for service.
•
If the battery is low, "LOW BATTERY E02-00 SERVICE" will appear in
the display indicating a low battery condition. Allow 24 hours for the
battery to recharge. If the trouble continues, call for service.
Test your central station communicator
(Activate Dialer Test programmed? ‰ YES ‰ NO)
1. Notify your Central Station of the impending test.
2. While disarmed, enter your User Code and tap
R
.
3. Answer NO (tap
Q
) until "ACTIVATE DIALER TEST" appears in
the window.
4. Tap YES ( P ) to send a test code to the central station.
•
If the test is not successful, "COMM FAIL E03-00 SERVICE" will
display, indicating a communication failure. Call for service.
Note: Any subsequent successful transmission will clear a " Failure to
Communicate " system trouble
.