iBridge IBR-ITAB, User Manual

Page: 14 / 68

14
If the feature "EZ-ARM" is programmed, the arming steps will change. Ask your alarm installer if EZ-ARM is enabled.
(Optional - Is EZ-ARM programmed?
‰
YES
‰
NO)
1
Close all perimeter windows and doors before arming. The words "
System Ready " must appear in order to arm. If " Zones
Faulted " displays followed by the number and description of each faulted zone, then note each problem zone and secure it by
closing a window, door, etc. When all zones are secure, the window will display " System Ready ".
2
From the Home Screen, tap Security .
3
Tap Away .
•
If EZ-ARM is enabled: The
Exit Delay countdown takes place, during which time you are permitted to leave through the exit door
.
•
If EZ-ARM is NOT enabled: Enter your code and tap
U
. Note: If you enter a wrong code, " INVALID ENTRY, TRY
AGAIN " will display.
The Keypad Window will display " PLEASE EXIT IN XXX SECONDS " (where "XXX" represents the exit time remaining, in 10-
second steps).
4
Leave the premises. Leave through the exit door before the exit time expires.
If you are unable to arm…
If you attempt to arm with a faulted Zone, a 3-second tone will sound at the tablet. The audible message " There is a Zone
open, please secure and try again " and the text " CAN'T ARM SYSTEM, ZONE FAULTED " will display in the window,
indicating that the faulted zone(s) must be secured before the panel can be armed.
If you cannot secure the faulted zone(s), cannot locate or repair the problem yourself, either call your alarm installer for assis-
tance, or you can
temporarily bypass the problem zone(s) from the system (see Bypassing Zones on page 20).
AR M I N G " AW AY " : S E T T I N G T H E AL AR M W H E N L E A V I N G