18
Manual ISM
–
usb.1 / .2
7. Safety Instructions
The instrument has been designed and manufactured according to the state of the art and approved
technical safety regulations. It is nevertheless mandatory to observe the following instructions in order to
prevent personal injuries or accidental death of staff members and other persons.
1) All operators must read the present instructions and this manual very carefully
prior to starting
operation
.
2) The instrument may be used only
in proper operational
condition. Malfunctions or errors that may
potentially impair the operational safety must be eliminated immediately.
3) The instrument is to be used only for its intended purpose and according to the Instruction Manual.
The Instruction Manual is to be kept near the place of operation and ready for use.
4) Any modification to or change in procedures concerning the instrument is permitted only with the prior
written consent of IBR Messtechnik GmbH & Co. KG and must be carried out by trained staff. Unau-
thorised opening of the instrument or tampering with the device shall void the guarantee and exempt
the manufacturer from any liability. Before opening the instrument, make sure to effectively cut the
power supply, e.g. by disconnecting the power cable.
5) Disconnect the instrument prior to cleaning.
Never let any liquids penetrate the inside of the instrument.
Do not use cleaners that dissolve plastic.
6) Replace faulty fuses only with fuses of
identical
amperage and current characteristics following the
instructions given in this manual.
7) Corporate guidelines and safety regulations enforced by the industrial trade associations for the
prevention of industrial accidents must be strictly observed. Make sure to consult the safety officer at
your company.
8) Do not operate the instrument in an environment containing explosive gases, because an electric spark
can cause an explosion.
We reserve the right to change the design and technical data contained in our documentation without
notifying our customers. IBR is not obliged to notify buyers of product changes.
IBRit
is a registered trademark of IBR.
Windows, EXCEL
and
Word
are registered trademarks of Microsoft Corporation.
This document must not be reproduced, in part or in its entirety, without the prior written consent from IBR.
