background image

 

 
                                                                                                                                                                                
                                                                                                                                                                  

 
 

                                                          

17 

 

Manual     ISM

 

 

usb.1 / .2 

 

 

    6.

  

  

Important conditions concerning the use of IBR_SimKey PC software 

 

1.  The

 IBR_SimKey 

software is an accessory for the 

IBRit-rf1-usb 

or

 ISM-usb 

PC - Radio station. It is 

free of charge and so 

IBR

 does not give any guarantees for the

 IBR_SimKey 

software. 

 

2.  IBR software products are not developed and tested for the high demands in the medical field, in 

combination with applications in the medical field or in critical components of life-saving systems 
whose malfunctions or failure can lead to personal injury. 

 

3.  On absolutely all applications the stability of the software can be influenced by different factors, e.g. 

fluctuations in the power supply, computer hardware errors, operating system errors, compiler errors, 
application development software errors, installation errors, software and hardware compatibility  
problems, malfunctions or errors of electronic supervisory systems and controller units, transmission 
errors within electronic systems ( hardware and/or software ), unintended use or misuse as well as  
errors by the operator or system developer ( harmful influences such as the factors mentioned above 
are in the following referred to as “SYSTEMERRORS” ).  

 

4.  All applications which contain the risk that SYSTEMERRORS can lead to damages or personal inju-

ries should not only depend on electronic systems. In order to avoid damages, injuries or death the 
operator or system developer should create reasonable, suitable precautions against 
SYSTEMERRORS or their consequences. These precautions can include backup or shutoff  
mechanisms. 

 

5.  Because all computer systems are adapted for the operator the systems are different in comparison 

with the IBR test systems. Because the IBR products can also be integrated in applications not tested 
or not intended in this way by IBR the operator or system developer is completely responsible for the 
test and release of the applications in which IBR products are embedded. This contains the structure, 
the procedure and the security level of the application. 

 

6.  In no event IBR will be liable for any damages including lost profits or any special, indirect, incidental 

or consequential damages arising out of the use or inability to use the product, whether claimed under 
the safety instructions or otherwise. 

 

7.  Corporate guidelines and safety regulations enforced by the industrial trade associations for the pre-

vention of industrial accidents must be strictly observed. Make sure to consult the safety officer at your 
company. 

 

8.  All rights depend on German law. 

 

9.  All rights for the 

IBR_SimKey 

software belong to 

IBR Messtechnik GmbH & Co. KG

 

 

 

 
 
 
 
 

 
 
 

 
 
 

Summary of Contents for ISM-usb.1





















Reviews: