4
Instruction Manual C100-AE
Numeric display
Mode / Units
Programming Menu
Keypad
Column display ranges
± 1,5000 mm ± 0,15000"
The column display features 3 colours ( red, green, yellow ) with
±
0,5000 mm
± 0,05000"
automatic colour selection corresponding to the given
± 0,1500 mm
± 0,01500"
tolerance limits.
± 0,0500 mm
± 0,00500"
It is possible to programme up to 4 tolerance limits.
± 0,0150 mm
± 0,00150"
Tolerance limits are marked on the column display.
± 0,0050 mm
± 0,00050"
Notice:
The measurement range of the column display can be set in the Setup menu to a fixed value or to
AUTO
mode. In AUTO mode the column gauge automatically selects the smallest possible range on the base of
the programmed tolerances. The selected range is displayed in the upper right corner of the front panel.
1.3 Front and rear panel
Column display range
and unit
3 coloured LED column
RS232 male connector
Tol. Out socket
Power switch
Mains inlet
Tolerance marks
( max.4 )
For future expansion
Connectors sketch
Integrated pneumatic
converter
Connector for gauge
heads
Restrictor for air flow
adjustment
Pressure input
2 - 3 bar ( 30 - 45 psi )
Type label
Type label
Summary of Contents for C100-AE
Page 30: ...30 Instruction Manual C100 AE ...
