19
Instruction Manual C100-AE
tol.LEd
In this menu flashing of tolerance points when measured values are out of tolerance is enabled
or disabled.
Flash
= The tolerance points are flashing if measured values are out of the green area.
Lit
= Tolerance points do not flash.
PASS.Cd.
For protection of programme settings in this menu you can set a password option on or off.
If the password option has been set to
"on"
the numeric display will force the operator to input a
password consisting of a 6-digit number.
Notice :
If the Programming menu is called later by the
PRG/CAL
key the column
gauge will prompt you to introduce the 6-digit password.
( If you have forgotten the password, you can nevertheless access the
programming menu with the password
240355 )
.
FiLtEr
In this menu you can select a digital filter for the measured values.
oFF
- Digital filter is off.
1...6
- Filter levels
Notice :
For normal measurements the filter time constant should be set to 1 or 2.
Higher filter values are necessary only for special applications.
Summary of Contents for C100-AE
Page 30: ...30 Instruction Manual C100 AE ...
