4.6.
PUMP BODY AND MOTOR BODY THERMAL INSULATION
In order to limit heat losses at the heating medium flow through the pump, the
pump and motor body can be thermally insulated by means of, for example, a Styrofoam
lining.
Do not insulate or cover the junction box or the control panel.
5.
ELECTRIC CONNECTION:
The electric connection and protection must follow the local regulations.
The electric pump must be connected to an earthing conductor.
The pump must be connected to the external power supply breaker. The minimum slit between
the pins of the breaker must be 3 mm.
•
MAGI series circulation pump does not require any external motor guards.
•
Check if the power supply voltage and frequency are compliant with the parameters
specified on the rating plate.
•
Use the special plug supplied with the pump to connect the power supply cable.
•
If the control signal on the control panel illuminates, the power supply is switched on.