17.
If a pump failure cannot be removed according to the manual, immediately
disconnect the pump from its power supply, close the cut off valves and
immediately contact the local manufacturer or the servicing centre.
18.
The product must be placed in a place far away from children and measures to
isolate the product must be taken to avoid children touching it.
19.
The product must be connected to the electric mains equipped with efficient electric
earthing. The yellow-green core of the connection cable is earthing.
20.
The product must be connected to mains equipped with a residual current circuit
breaker with tripping current ΔI
n
not exceeding 30 mA.
21.
The product must be placed in a dry, well-ventilated and cool place and stored
at room temperature.
22.
This equipment is not intended for use by persons (including children) with reduced motor,
sensory or mental capacities, or persons without experience or not familiarised with the
equipment, unless it is performed under supervision or according to the instruction
regarding operation provided by persons responsible for their safety. Attention should be
paid so that children do not play with the equipment.
WARNING!!!
Before proceeding to install the device, carefully read the instructions for installation
and operation of the device. The installation and use of the device must conform to the
local regulations and this manual.
WARNING!!!
People (including children) with limited physical, sensory or mental capacity or people
without experience or knowledge in equipment must use the pump under supervision and
guidance of the people who can take responsibility for their safety.
1.
SYMBOLS USED IN THE MANUAL
WARNING: Failure to observe instructions marked in this way will most probably cause
bodily injury!
Failure to observe instructions marked in this way can cause equipment damage!
Remarks or instructions facilitating operation and providing safety of use.
2.
INSPECTION
2.1.
The series of PSI circulation pumps is used mainly in water circulation in boiler
central heating systems in houses.
The PSI series circulation pump serves best in the following systems:
•
Fixed-temperature heating system with variable flow
•
Heating system with variable pipeline temperature
•
Heating system with night mode
•
Air conditioning system
•
Industrial circulation system
•
Home central heating and home hot service water service.
The PSI series circulation pump is equipped with a motor with
permanent magnets and pressure difference regulator, which
constantly and automatically adapt the pump efficiency to meet
the actual needs of the system. The MAGI series circulation pump
is equipped with a control panel on the top of the motor, which
makes it easier to use it.