IBM XIV Gen3 Series, Planning Manual

Page: 114 / 126

Note: Customers in other locations can contact Eaton-Williams Group or Vette
Corporation (see Table 40 on page 89).
Table 41. Cooling distribution unit supplier information for customers in Europe
Supplier Cooling distribution units Contact information
Eaton-Williams
Group, Ltd (UK)
v CDU120 (120 kW, 400 - 480V)
v CDU121 (120 kW, 208 V)
v CDU150 (150 kW, 400 - 480V)
v CDU151 (150 kW, 208 V)
Website :
Eaton-Williams
(www.eaton-williams.com/)
Phone :
(0) 1732 866055
Fax
:
(0) 1732 867937
Address :
Eaton-Williams Group Ltd.
Station Road
Edenbridge
Kent
TN8 6EZ
The following illustration shows the Eaton-Williams cooling distribution unit
features.
The cooling distribution unit specifications are described in the following table.
Table 42. Eaton-Williams cooling distribution unit specifications
Performance Properties
Maximum cooling capacity 120 kW (409 450 Btu/hr) or 150 kW (511 815
Btu/hr)
Plate heat exchanger
Reservoir tank
Primary flow meter
Level switch
Pump isolation valves
Lockable castor and
adjustable plinth
Secondary pumps
(run and standby)
Pump transit bracket
(remove after installation)
Primary control valves
(run and standby)
Control display
(user interface)
Control panel
xiv10140
Figure 32. Eaton-Williams cooling distribution unit features
90
IBM XIV Gen3 281x-11x, 281x-21x, and 281x-314 Planning Guide