IBM WebSphere DataPower XI50B, Installation And User Manual

Page: 13 / 62

Chapter 1. Introduction
The IBM
®
WebSphere
®
DataPower
®
Integration Blade XI50B, Type 4195 is
compatible with IBM BladeCenter
®
H and HT units and with IBM BladeCenter E
units that have an advanced management module installed. The appliance is a
double-wide configuration that installs in two adjacent blade bays of the
BladeCenter unit.
Important:
If the IBM WebSphere DataPower Integration Blade XI50B is purchased
through Passport Advantage, the machine type is Type 2426-4BX. This document
applies to Type 4195-4BX and to Type 2426-4BX appliances until otherwise
indicated in new editions.
Note: Unless otherwise stated, references to the BladeCenter unit apply to all
supported BladeCenter unit types.
This Installation and User's Guide provides information about:
v
Setting up the blade appliance
v
Starting and configuring the blade appliance
v
Performing basic troubleshooting of the blade appliance
v
Replacement parts for the blade appliance
Packaged with this document are resource CDs that help you to configure
hardware and system software.
The blade appliance comes with a limited warranty. For information about the
terms of the warranty and getting service and assistance, see the
Warranty
Information document for your blade appliance on the IBM Documentation CD.
The blade appliance might have features that are not described in the
documentation that comes with the blade appliance, and the documentation might
be updated occasionally to include information about those features, or technical
updates might be available to provide additional information that is not included
in the blade appliance documentation.
To download the latest blade appliance firmware, see “Downloading the firmware
image” on page 25.
© Copyright IBM Corp. 2011, 2013
1