Expansion Slots
Expansion Slots
This mainboard has three PCI 32-bit expansion slots and two 8/16-
bit ISA slot.
Use the PCI slots to install 32-bit PCI expansion cards. Use the
ISA slots to install legacy 8/16-bit expansion cards.
Installing an Expansion Card
1. Locate the PCI or ISA slot on the mainboard.
2. Remove the blanking plate from the appropriate expansion slot
on the system chassis.
3. Install the edge connector of the expansion card into the slot
and press it quite firmly down so that it is seated correctly.
4. Secure the bracket of the expansion card into the expansion
slot in the system chassis using the screw that held the
blanking plate in place.
Wake On LAN Connector
If you have installed a LAN adapter expansion card, you can
connect it to the J3 Wake on LAN connector. Incoming traffic to
the LAN adapter can then resume the system from a power-saving
mode or a software powerdown. You might need to enable this
item in the setup utility first.
25
PCI1
ISA1
PCI2
PCI3
ISA2
