Chapter 2
Install the Mainboard
Install the mainboard into the system chassis. This mainboard uses
the baby-AT format. However, the board supports an AT or an
ATX power supply. If you use an AT power supply, some of the
ATX power management features might not function.
Install the mainboard into the unit case. Follow the instructions
provided by the case manufacturer using the screws and mounting
points provided in the chassis.
If you are using a case with an ATX power supply, connect the
power cable from the ATX power supply unit to the power
connector PWR2 on the mainboard.
If you are using a case with an AT power supply, connect the
power cable from the AT power supply unit to the power connector
PWR1 on the mainboard.
14
J8
1
PWR1: AT
PWR2: ATX
