IBM TURBOWAYS 622 PCI MMF ATM, Installation And Using Manual

Page: 14 / 44

v
After a successful installation,
SUCCESS
will appear in the Result column of the
summary at the bottom of the page.
15. Remove the installation media from the drive.
16. Press F10 to exit SMIT.
17. Refer to your system unit documentation to shut down your system unit.
18. Go to the adapter hardware installation procedure, “Chapter 5. Installing the
TURBOWAYS 622 PCI MMF ATM Adapter” on page 13.
Verifying AIX Software Installation
To verify that the device driver for the TURBOWAYS 622 PCI MMF ATM Adapter is
installed, do the following:
1. If necessary, log in as root user.
2. At the command line, type:
lslpp -1 devices.pci.14105e01.rte
3. Press Enter.
Possible results are as follows:
v
If the TURBOWAYS 622 PCI MMF ATM Adapter device driver is installed, the
following is an example of the data that displays on your screen:
Fileset Level State Description
-----------------------------------------------------------------------
Path: /usr/lib/objrepos
devices.pci.14105e01.rte 4.3.3.25 COMMITTED ...ATM...
Adapter Software
Path: /etc/objrepos
devices.pci.14105e01.rte 4.3.3.25 COMMITTED ...ATM...
Adapter Software
Verify that the fileset devices.pci.14105e01.rte is installed at the 4.3.3. level or
higher.
If this information displays but you continue to have problems, go to “Chapter 5.
Installing the TURBOWAYS 622 PCI MMF ATM Adapter” on page 13.
v
If no data displays on your screen, the TURBOWAYS 622 PCI MMF ATM Adapter
device driver did not install correctly. Return to “Chapter 3. Installing Device
Driver Software” on page 5.
If you continue to experience problems, it may be necessary to call your system
support organization. Refer to your operating system documentation for
instructions.
6
Installation and Using Guide