IBM TS2280 Setup, Operator, And Service Manual Download Page 78

Page: 78 / 142

Table 15. Media supplies (continued)

Supply Item

Methods of Ordering

Specify the VOLSER characters that you want.

20-PACK IBM Ultrium 5 1500 GB WORM Tape
Cartridge (with attached labels)

Order the cartridge from your IBM Sales Representative or
any authorized IBM Business Partner by specifying Machine
Type 3589 Model 034.

You can also order through an IBM-authorized distributor,
or online at: http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 5 1500 GB WORM Tape
Cartridge (without labels)

Order the cartridge from your IBM Sales Representative or
any authorized IBM Business Partner by specifying Machine
Type 3589 Model 035.

You can also order through an IBM-authorized distributor,
or online at: http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 4 800 GB Data Cartridge
(with attached labels)

Order the cartridge from your IBM Sales Representative or
any authorized IBM Business Partner by specifying Machine
Type 3589 Model 010.

You can also order through an IBM-authorized distributor,
or online at: http://www-1.ibm.com/storage/tape/lto

20-PACK IBM LTO Ultrium 4 800 GB Data Cartridge
(without labels)

Order the cartridge from your IBM Sales Representative or
any authorized IBM Business Partner by specifying Machine
Type 3589 Model 011.

You can also order through an IBM-authorized distributor,
or online at: http://www-1.ibm.com/storage/tape/lto

5-PACK IBM LTO Ultrium 4 800 GB Data Cartridge
(black and white labels unattached)

Order as part number 95P4278 through an IBM-authorized
distributor.

20-PACK IBM Ultrium 4 800 GB WORM Tape
Cartridge (with attached labels)

Order the cartridge from your IBM Sales Representative or
any authorized IBM Business Partner by specifying Machine
Type 3589 Model 032.

You can also order through an IBM-authorized distributor,
or online at: http://www-1.ibm.com/storage/tape/lto

20-PACK IBM Ultrium 4 800 GB WORM Tape
Cartridge (without labels)

Order the cartridge from your IBM Sales Representative or
any authorized IBM Business Partner by specifying Machine
Type 3589 Model 033.

You can also order through an IBM-authorized distributor,
or online at: http://www-1.ibm.com/storage/tape/lto

IBM LTO Ultrium 3 400 GB Data Cartridge

Order VOLSER labels separately (see “Ordering bar
code labels” on page 57).

Order as part number 24R1922 through an IBM-authorized
distributor, or online at: http://www-1.ibm.com/storage/
tape/lto

IBM LTO Ultrium 3 400 GB WORM Tape Cartridge

Order VOLSER labels separately (see “Ordering bar
code labels” on page 57).

Order as part number 96P1203 through an IBM-authorized
distributor, or online at: http://www-1.ibm.com/storage/
tape/lto

IBM LTO Ultrium 2 200 GB Data Cartridge

Order VOLSER labels separately (see “Ordering bar
code labels” on page 57).

Order as part number 08L9870 through an IBM-authorized
distributor, or online at: http://www-1.ibm.com/storage/
tape/lto

IBM TS2280: Setup, Operator, and Service Guide Machine Type 3580 Model H8S

Summary of Contents for TS2280















































































































































Search results

Summary of Contents for TS2280

Reviews:

Related manuals for TS2280

Brands by name

Popular brands

IBM TS2280, Setup, Operator, And Service Manual

Search results

Summary of Contents for TS2280

Reviews:

Related manuals for TS2280

Brands by name

Popular brands