report,
Programming block
n of 7 yy%
, is displayed. When the procedure
completes, the following message is displayed:
Recovery complete,remove the diskette and return boot block switch to
the off position before rebooting
.
6. Remove the flash diskette from the diskette drive.
7. Turn the appliance off.
8. Remove the jumper from the boot-block jumper block or move it to pins 1 and 2
to return to normal startup mode.
9. Restart the appliance. The system should start up normally.
Intel PROSet II
Your appliance comes equipped with Intel PROSet II for monitoring the status of the
Ethernet adapter PCI cards. PROSet performs a loop-back test on 10/100 and GB
Ethernet PCI cards.
To access the PROSet utility, you must first go into Terminal Services. For
instructions on how to invoke Terminal Services, please see “Terminal Services and
the IBM NAS Administration Console” on page 17. Once you are in Terminal
Services, you then go to the Start menu, select Settings, then Control Panel , and
finally, you double-click the icon for Intel PROSet II.
You can view the following using PROSet:
v
Adapter parameters such as MAC Address and IP Address
v
Network link status such as speed, duplex mode, and activity
v
Device driver level used for the adapter
For additional information about Intel PROSet, please refer to the online help that
accompanies the utility.
FastT Check
Your appliance also comes with FastT Check for viewing the status of your Fibre
Channel connection. You access FastT Check by going into the IBM NAS Admin
console, clicking NAS Management, then Storage, then NAS Utilities, and finally
FastT Check.
After clicking Connect on the FastT Check interface, a diagnostic panel displays
the following general information related to your Fibre Channel adapter:
v
Node name
v
Serial number (in hex)
v
Loop ID
v
BIOS version
v
Firmware version number
v
Device driver version number
v
PCI slot number
The above information is especially useful should you need to place a support call.
FastT Check also provides the appliance MAC address as detailed in “FastT Check”
on page 25.
Chapter 5. Troubleshooting
33
Summary of Contents for TotalStorage Network Attached Storage 300G
