Complete the following steps to replace the failed hot-swap power supply.
Statement 8:
CAUTION:
Never remove the cover on a power supply or any part that has the following
label attached.
Hazardous voltage, current, and energy levels are present inside any
component that has this label attached. There are no serviceable parts inside
these components. If you suspect a problem with one of these parts, contact
a service technician.
1. Ensure that the ac power switch on the power supply you are installing is in the
off position.
2. Install the power supply in the expansion unit:
a. Slide the power supply into the expansion unit. Be sure the lever is pulled
straight out as you slide the power supply into the expansion unit (see
Figure 40).
b. Close the lever until the pull-ring latch locks in place. Make sure the lever
locks into place in the expansion-unit chassis.
3. Wrap the strain relief clamp around the power cable approximately 20 cm (8 in.)
from the power-supply connection end.
Lever screws
Lever
Pull ring
Figure 40. Moving the power-supply lever and replacing the failed hot-swap power supply
44
IBM TotalStorage FAStT EXP700 Storage Expansion Unit: Installation and User’s Guide
Summary of Contents for TotalStorage FAStT EXP700
