IBM TotalStorage FAStT EXP700, Installation And User Manual

Page: 44 / 100

Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v
Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
v
Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
1. Read the information in “Handling fiber-optic cables” on page 23.
2. If necessary, remove the protective cap from the SFP module, as shown in
Figure 16 on page 22. Save the protective cap for future use.
3. Remove the two protective caps from one end of the LC-LC cable, as shown in
Figure 19. Save the protective caps for future use.
4. Carefully insert that same end of the LC-LC cable into an SFP module that is
installed in the FAStT EXP700. The cable connector is keyed to ensure it is
inserted into the SFP module correctly. Holding the connector, push in the cable
Protective cap
Fiber-optic
cable
Figure 19. Removing fiber-optic cable protective caps
24
IBM TotalStorage FAStT EXP700 Storage Expansion Unit: Installation and User’s Guide