IBM ThinkPad 570E, User Manual

Page: 117 / 166

Appendix A. Using PS2 commands
Using PS2 Command
This section describes PS commands. The
PS2
commands are
subject to change without notice. If you enter a command written in
this section and receive an error, type
PS2 ?
and refer to the online
help menu.
You can enter the following
PS2
command options from the DOS
command prompts on Windows 98, Windows 95, Windows NT, or
DOS to set the features for your computer. When entering a
command, enter it in the following syntax:
PS2
[ Parameter1] [Parameter2] [Parameter3]
Note:
You cannot use the following
PS2
commands in the Windows
98 environment:
PRESENtation HTimer POwer DISK
LCd ON TImer DEFAULT
Syntax rules
Refer to these notes when you enter a command.
Copyright IBM Corp. 1999
111