IBM ThinkPad 570E, User Manual

Page: 92 / 166

ThinkPad UltraBase hot/warm swap driver
For details on how to use the Software Selections CD, refer to its
help.
Installing Microsoft Windows 98
Notes:
1. If you are installing Windows 98 on a drive other than the C
drive, more than 25 MB is required on the C drive.
2. To use the CD-ROM drive to install Windows 98, create the
Startup Disk for Windows 98, which enables you to use the
CD-ROM drive. Then boot the system with the diskette.
To create the Startup Disk for Windows 98, do as follows:
a) Insert a blank diskette into the diskette drive.
b) Open the Control Panel window.
c) Double-click Add/Remove Programs.
d) Click the Startup Disk tab.
e) Click Create Disk...
f) Follow the instructions on the screen.
1
Insert the Windows 98 CD-ROM into the CD-ROM drive.
2
Search for SETUP.EXE in the CD-ROM, and run the
SETUP.EXE. Type the following:
src_cd:\tgt_dir\SETUP.EXE
where
src_cd
is the drive letter of the CD-ROM drive and
tgt_dir
is the directory that SETUP.EXE is in.
For more information, refer to the SETUP.TXT in the Windows
98 CD-ROM.
3
Press Enter.
4
After Windows 98 is installed, replace the Windows 98
CD-ROM with the Software Selections CD.
5
Click Start.
6
Click Run...
86
IBM ThinkPad 570 Online Book