IBM System x3755 M3 7164, Installation And User Manual

Page: 77 / 126

10. Push the tray handle to the closed (locked) position.
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 68.
Installing an internal flash memory
Attention: Before you install an internal flash memory for VMware, make sure
you install at least two DIMMs for each microprocessor in the server.
The server supports one internal flash memory (or hypervisor key) that is installed
in the USB connector on the drive cage.
To install the internal flash memory, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 28.
2. Turn off the server and peripheral devices, and disconnect the power cord and
all external cables.
3. Remove the cover (see “Removing the top cover” on page 37).
4. Locate the USB connector on the drive cage and insert the internal flash
memory into the connector.
Chapter 2. Installing optional devices
59