IBM System Storage DS3300, Installation, User'S, And Maintenance Manual

Page: 20 / 140

5. Make the following selections:
v For firmware updates, click the Download tab.
Note: Check the RAID controller management software for the firmware
version that is installed on the environmental services module (ESM).
v
For documentation updates, click the Install and use tab.
Note: Changes are made periodically to the IBM Web site. Procedures for locating
firmware and documentation might vary slightly from what is described in this
document.
The DS3300 comes with a limited warranty. For more information about the terms
of your warranty, see the
Warranty Information document that comes with the
storage subsystem.
Record information about the DS3300 in Table 8 on page 105. You will need this
information if you have to call for service.
The serial number is on the label in the vertical recess on the left bezel. The serial
number is also on the left chassis flange and on the rear of the chassis. A label that
includes the machine type, model, and serial number is on the top front right
chassis corner. The following illustration shows the serial number label, product
name (DS3300), and machine type, model, and serial number label on the front of
the DS3300.
Note: The illustrations in this document might differ slightly from your hardware.
Use Table 9 on page 106 to keep a record of the hard disk drives that are installed
in or attached to the DS3300. This information can be helpful when you install
additional hard disk drives or if you have to report a hardware problem. Make a
copy of this table before you record information in it, in case you need extra space
to write new values later, or when you update the DS3300 configuration.
Serial number label
Product name
Machine type, model, and
serial number label
Figure 1. Example of DS3300 serial number label, product name, and machine type and
model number locations
2
System Storage DS3300 Storage Subsystem: Installation, User’s, and Maintenance Guide