IBM StorageSmart DF1100J, Operator'S Manual

Page: 18 / 52

HOST FC Status light
«4¬
This Status light, which is amber, is lit when there is no valid Fibre
Channel connection through the HOST port, or when the port is inactive
while it is waiting for failover.
OUT FC Status light
«5¬
This Status light, which is amber, is lit when there is no valid Fibre
Channel connection through the OUT port, or when the port is inactive
while it is waiting for failover.
Card Fault light
«6¬
The Card Fault light, which is amber, is lit when there is a fault on the
RAID FF card or during boot up of the RAID FF card.
FC-AL Interface Cards
Two FC-AL interface
«1¬
cards are installed in the back of a ProFibre Storage Array
Expansion Unit.
An FC-AL interface card has the following lights:
Status lights
«1¬
There are two amber Status lights. The one on the left is lit when there is
no active Fibre Channel connection to the IN port. The one on the right is
lit when there is no active Fibre Channel connection to the OUT port.
mef30117
Figure 8. FC-AL Interface Card Assemblies
Figure 9. FC-AL Interface Card Assembly Lights
8
ProFibre Storage Array: Operator’s Guide