6. Using the screw from the expansion slot cover, secure the mounting bracket of
the graphics adapter to the computer frame.
This graphics adapter comes with a bracket for the ATX-type computer already
attached. To attach the bracket for an NLX-type computer to the graphics
adapter, follow the diagram below.
7. Replace the cover on your computer.
8. If you have a standard analog monitor, attach the included blue dongle to the
monitor connector on the graphics adapter; then plug your monitor cable into the
dongle. If you have a digital or analog monitor with DVI-I connectors, plug your
monitor cable directly into the blue connector on the graphics adapter. Plug the
other end of the monitor cable into your monitor.
Refer to the documentation that comes with your monitor to make sure that the
monitor is properly set up.
9. Plug the cables for any other attached devices into your computer. Plug the
power cables for the computer, monitor, and other attached devices into a power
outlet; then turn on your computer and all attached devices.
Part 1: Installation Guide 1-3
